(You save $204.16)
Dynabrade 53271 7" Rebel Right Angel Disc Sander w/ Autobalancer
2.8 hp, 8,500 RPM, Adjustable Exhaust, 5/8"-11 Spindle Thread
Rebel 2.8 hp series grinders and sanders are powerful tools designed to overcome the challenges of heavy-duty industrial applications. Grind through heavy welds, rapidly remove parting lines or cut & grind through large gates with the most powerful right angle grinder or sander from Dynabrade, the Rebel 2.8 hp series. Durability has been elevated to a new level; with 1,000+ hours of use between recommended maintenance, the Rebel 2.8 hp is a tool to depend upon. Industrial applications can be optimized using a variety of abrasives with an assortment of attachment options. Dynabrade has engineered optional guards, flanges, and backing pad configurations that make abrasive compatibility with the Rebel 2.8 hp Series easy!
POWER – The best rotor & vane style motor power-to-weight ratio in the industry. (Grinders 2.8 hp at 7.3 lbs. & Sanders 2.8 hp at 6.2 lbs.) – Governor-controlled motor maintains consistent power in demanding applications.
DURABILITY – Sealed gear case with ultra high-performance gear grease. – 1,000+ hours between recommended maintenance. – Cast aluminum motor housing.
COMPATIBILITY – Work with fiber discs, layered flap discs, type 27, 28, 29, or 42 abrasives using guard & flange configurations. – Adjustable guard & vibration dampening handle allow for left or right-handed use.
- The best power-to-weight ratio in the industry with governor-controlled motor for demanding applications.
- Sealed gear case, 1,000+ hours before maintenance, cast aluminum motor housing
- American-made with adjustable guard & vibration dampening handle allow for left or right-handed use.
- Compatible with fiber discs.
- Spiral Face Thermoplastic back-up pad and spanner wrench included.
Disc Sanders Preparation & Blending
Rebel 2.8 hp disc sanders are the most desirable tool choice in sizable preparation, blending and MRO applications. Having a lower profile and even weight distribution improves sightlines and increases maneuverability for operators.
1. 10° OFFSET HANDLE Promotes natural hand & wrist position
2. GOVERNOR-CONTROLLED MOTOR Provides consistent power under load
3. OVERSPEED SHUTOFF MECHANISM For operator safety
4. SEALED GEAR CASE Protects gears & reduces maintenance
5. AUTOBALANCER (MODEL SPECIFIC) For reduced vibration
6. SPINDLE LOCK Fast, easy abrasive changes
7. SAFETY-LOCK THROTTLE LEVER Prevents accidental startup
SPIRAL BEVELED GEARS
– Specifically matched to ensure even wear.
– Sealed gear case with high-performance grease for 1,000+ hours of typical usage before recommended maintenance
– Directs exhaust away from operator.
– Muffler cover can be positioned for left or right-handed operators
– Roates 67° from center for operator protection and improved sightlines.
– 5 screws safely secure guard.
POWER & TORQUE
– By delivering power under load, Rebel 2.8 hp grinders and sanders outperform competitors in heavy-duty applications.
– Compared to its competitors, the Rebel 2.8 hp Series maintains greater power as torque demands increase.
|Backing Pad Diameter Inch (mm):||7" (180)|
|hp (W):||2.8 (2,100)|
|Free Speed RPM:||8,500|
|Tool Spindle Thread:||5/8"-11 Male|
|Max. Air Flow @ 90 PSIG: SCFM (L/Min.):||115 (3,256)|
|Hose I.D. Size Inch (mm):||1/2" (13)|
|Length Inch (mm):||13.4" (340)|
|Height Inch (mm):||4.1" (107)|
|Sound Level dB(A):|
|Item Weight:||6.2 lbs|
Tech Tip: Always present the tool and abrasive to the work piece at a 10° – 15° angle for efficient abrasive use and to prevent gouging
Find Similar Products by Category
Customers also viewed